Soap Base

White soap base ready to melt and pour into moulds. Perfect for home-made soaps with colours.

This white ready-made soap base lets you easily create your own soaps at home. The soap melts at 70-75°C and can be melted over a water bath or in a microwave. It contains glycerine to gently clean and moisturise skin – and the white look gives the soaps a crisp and chic look. The soap base is ready for adding your choice of soap dyes. The naturally high content of moisturising glycerin can cause the soap to sweat because glycerin attracts moisture from the air, which can form condensation on the soap. To limit sweating and ensure long-lasting soap, you should follow the instructions and procedure carefully..

How to use it:.

• Make soap in a room with good air circulation and low humidity.
• Cut the soap base into smaller pieces and melt over a water bath (50-70°C) or in the microwave at 80% power at 30-second intervals. Do not allow the water in the water bath to boil and the soap base must not exceed 70-80°C.
• Stir the soap between each heating until it is completely liquid.
• Add soap dyes, fragrances, dried flowers or glitter for a unique effect.
• Pour the liquid mixture into silicone moulds and allow to harden for around 1 hour before removing from the moulds.
• Allow the soap to harden for 24 hours on an absorbent surface (e.g. cardboard).
• Wrap the soap in tissue paper and store in an airtight container or cellophane bag until use - the perfect hostess gift or for your own bathroom.
• When using the soap, it should be stored in a self-draining soap dish so that the water can run off.