Creative idea

Mobile phone bag

#v11166

Make your own cool leather mobile phone bag.

#v11166
Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

How to do it
Guide step %d
1   Measure your mobile phone. Add 1.5cm to each side. Cut in 1.5cm on either side for the flap.
Guide step %d
2   Cut out four strips for decoration, each 1.5cm wide and 2.5cm long
Guide step %d
3   Attach an oval jump ring onto each strip and make holes with revolving punch pliers for sewing on the strips.
Guide step %d
4   Mark out where you want to attach the strips.
Guide step %d
5   Make holes.
Guide step %d
6   Pull a cord through the holes.
Guide step %d
7   Sew on the strips.
Guide step %d
8   Repeat twice and let the strips overlap.
Guide step %d
9   Make four holes in the last strip.
Guide step %d
10   Mark out
Guide step %d
11   Make four holes in the flap of the mobile phone bag.
Guide step %d
12   Cross the cord through the last hole and finish with a knot on the back.
Guide step %d
13   Make holes with revolving punch pliers through both layers of the mobile phone bag for eyelets. These should be 0.5cm from the edge.
Guide step %d
14   Mark out holes in the side (1cm spacing between each hole) for sewing it together.
Guide step %d
15   Make holes. Hold the leather together with a peg, so it does not slip.
Guide step %d
16   Mark eyelets on the flap.
Guide step %d
17   Make holes.
Guide step %d
18   Attach eyelets.
Guide step %d
19c   -
Guide step %d
20   Front
Guide step %d
21   Back
Guide step %d
22   Cut two pieces of cotton cord each measuring 50cm. Pull a round jump ring onto the middle and double over the cords.
Guide step %d
23   Plait with four cords. Cut four cords 1/3 longer than the desired finished length. Tie the cords together and secure them onto a Macramé Board. Start alternating with the cord located at the far right side and the cord at the far left side. Put the cord you are holding down between the two cords which you have in the opposite hand, place it underneath the inner cord and then back so that it is placed inside, at the side it came from. See step by step photo on pages 23-29. Continue to desired length.
Guide step %d
24   -
Guide step %d
25   -
Guide step %d
26   -
Guide step %d
27   -
Guide step %d
28   -
Guide step %d
29   -
Guide step %d
30   Cut off the ends and glue them together.
Guide step %d
31   Apply some glue on the end.
Guide step %d
32   Attach an end cap and hook it together with the bag in the round jump ring.
Guide step %d
33   Gather the two cords with the swivel claps.
Guide step %d
34   Attach the strap to the bag.
Guide step %d
35   The bag is now ready to use.
Also go exploring in
I'm shopping as
Copyright © 2021-present Magento, Inc. All rights reserved.