Cut out your chosen design from the glue foil sheet. Carefully remove the thin protective plastic layer from the back. You may need to use a needle to separate the layers.

Attach the glue foil design onto the manilla tag and rub across it with a bone folder or similar. Remove the other protective plastic layer, exposing the glue design on the manilla tag. Be careful not to touch the exposed sticky glue design.

Place a piece of deco foil on top of the exposed glue design on the tag with the coloured side facing towards you. Rub firmly across the design and then pull off the deco foil sheet. If the deco foil has not transferred completely, just repeat the process and rub on some more deco foil.

Tie a piece of string or thread onto the tag.