New
Creative idea

Colourful Christmas decorations made from papier-mâché pulp

#v17079

Make these festive Christmas decorations to decorate any room. They are made out of polystyrene balls and cut-out cardboard stencils, which are then covered with paper-maché pulp and painted with colours and patterns.

#v17079
Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

1 Guide step %d Cut out the designs marked on the box.
2 Guide step %d Wrap the masking tape provided around the hanging decoration.
3 Guide step %d Cover everything with tape. This ensures that the cardboard does not dissolve when wet pulp is applied.
4 Guide step %d Cut 20 cm of cord.
5 Guide step %d Pull the cord through the hanging decoration and tie a knot.
6 Guide step %d Mix the pulp. Three parts pulp are used to one part water.
7 Guide step %d Knead the pulp thoroughly. If it feels too dry, add a little more water.
8 Guide step %d Add the pulp.
9 Guide step %d Smooth the pulp to create an even surface.
10 Guide step %d Hang the hanging decoration to dry. It takes around 4 days for the pulp to dry completely.
11 Guide step %d Paint the hanging decoration.
12 Guide step %d Allow to dry.
13 Guide step %d If you want stripes, you can use the masking tape provided and attach it as shown in the picture. Press the tape firmly so that it adheres well.
14 Guide step %d Now paint along the edges of the tape with the same colour to make sure the lines are sharp.
15 Guide step %d Allow to dry.
16 Guide step %d Now paint with the desired colour for the other stripes.
17 Guide step %d Allow to dry.
18 Guide step %d Remove the tape and your hanging decoration is ready for use. Repeat the process with the other hanging decorations you cut out of the box.
19 Guide step %d Take a polystyrene ball and attach the hanging decoration by gathering it in the middle and pressing it into the ball.
20 Guide step %d Cut 20 cm of cord.
21 Guide step %d Add cord and tie a knot.
22 Guide step %d Start applying the pulp.
23 Guide step %d Once the ball is filled, the pulp is smoothed out to create an even surface.
24 Guide step %d Allow to dry.
25 Guide step %d Once the hanging decoration is dry, apply masking tape to the metal part as shown in the picture.
26 Guide step %d Now paint the entire ball in whichever colour you want.
27 Guide step %d Allow to dry.
28 Guide step %d Apply the tape in the desired pattern.
29 Guide step %d Make sure that the tape covers it completely.
30 Guide step %d Now paint with the same colour again so that there are sharp lines where there is tape.
31 Guide step %d Allow to dry.
32 Guide step %d Now paint with a different colour.
33 Guide step %d Allow to dry.
34 Guide step %d Remove the masking tape and your hanging decoration is ready for use. Repeat the process with the other balls.
Also go exploring in

Sign in / Create account

Copyright © 2021-present Magento, Inc. All rights reserved.