Clear Soap Base

Transparent soap base with glycerine – ready to melt and mould. Perfect for homemade soaps with visible details.

Want to make soap that is truly unique? This soap base is just what you need. The base is made with nourishing glycerine, which leaves skin soft and moisturised – and because the base is transparent, you can highlight creative details such as dried flowers, glitter or colourful swirl effects. The result is the most beautiful soaps for the bathroom. The naturally high content of moisturising glycerin can cause the soap to sweat because glycerin attracts moisture from the air, which can form condensation on the soap. To limit sweating and ensure long-lasting soap, you should follow the instructions and procedure carefully. .

How to use it:.

• Make soap in a room with good air circulation and low humidity.
• Cut the soap base into smaller pieces.
• Melt the base over a water bath (50-70°C) or in a microwave at 80% power for 30 seconds at a time. Do not allow the water in the water bath to boil and the soap base must not exceed 70-80°C.
• Stir the base while heating until it is completely liquid.
• Add fragrance oil, soap colour or dried flowers.
• Pour the mixture into silicone moulds and allow to dry for about 1 hour before removing from the moulds.
• Allow the soap to harden for 24 hours on an absorbent surface (e.g. cardboard).
• Wrap the soap in tissue paper and place in an airtight container or cellophane bag until ready for use.
• When using the soap, it should be stored in a self-draining soap dish so that the water can run off.