New
Creative idea
Clear bio-resin cast shell with beads
#v17289
Cast this lovely shell with sparkling beads and use it in your interior. Simply mix clear bio-resin cast and hardener 1:1 and pour into the mould. Add beads in any colour and size and once the mixture has hardened, you'll have a sparkling shell that’s ready to decorate your home.
#v17289
How to do it
1 
Wear disposable gloves while working. Mix 80 g of clear bio-resin cast with 80 g of hardener. It is important that the measurements are precise or the mixture will not harden properly. Gently stir the mixture together to prevent air bubbles from forming.
Wear disposable gloves while working. Mix 80 g of clear bio-resin cast with 80 g of hardener. It is important that the measurements are precise or the mixture will not harden properly. Gently stir the mixture together to prevent air bubbles from forming.2 
Fill half of the mould.
Fill half of the mould.3 
Pour your choiuce of beads into the mould.
Pour your choiuce of beads into the mould.4 
Pour the resin mixture into the mould until it is completely filled. Allow to harden for at least 24 hours. Note that the mixture is not fully hardened until after 7 days.
Pour the resin mixture into the mould until it is completely filled. Allow to harden for at least 24 hours. Note that the mixture is not fully hardened until after 7 days.5 
Remove the hardened mixture from the mould and sand the bottom slightly with fine sandpaper to remove any sharp edges.
Remove the hardened mixture from the mould and sand the bottom slightly with fine sandpaper to remove any sharp edges.Also go exploring in
