Self-hardening stamped clay Christmas decorations
#v16789
Make personalised Christmas decorations in self-hardening clay for the Christmas tree. Decorate them with stamps, print with spruce or write your name with stamp letters.
How to do it Download the templates/recipes
1 Roll out the clay to around 5 mm thick.
2 Cut out the clay with the cutter.
3 Dab the stamp in the ink pad. Avoid getting ink on the edges – if this happens, wipe it lightly with paper before stamping the clay.
4 Stamp the clay.
5 Pierce a hole in the ornament with a suitable tool – a flower stick was used here.
6 Make a print with spruce. Place spruce on the clay and roll over the spruce with firm pressure.
7 If desired, add stamp ink to the spruce.
8 "Stamp a name in the clay. Different versions can be made using your imagination, but remember to make hanging holes in all of them and attach string.
Inspiration Tip: Do not allow the ornaments to bend and dry them between two pieces of cardboard on a flat surface (such as the cardboard from the box). Place a book on top as a press. Drying time is around two days, but may vary depending on how hot it is, but do not place them directly on a heat source."
