Pendant of Wood Clay and Pardo Jewellery Clay

1   Fit the 5mm removable disc onto the rolling pin as shown in the photo.

2   Take an appropriate lump of Pardo clay and roll it flat on a plastic surface.

3   Cut out a heart with the largest heart shape cutter.

4   Remove the excess Wood Clay and put it back in the packet. Make sure it is stored in an airtight container.

5   Make a hole for hanging with a suitable object. Let the heart air dry for approx. 24 hours.

6   Roll a lump of Pardo clay on a smooth surface. We have used a Swirly Pardo. An acrylic plate can be used to press and roll Pardo clay.

7   Put the heart in a 130 degree preheated oven and bake for 30 minutes. After the heart has cooled down, varnish it with Pardo Clay Varnish.

8   Once the paint has dried completely, attach the little heart on top of the big heart with glue. We have here used Clear Marker which is easily applied.

9   Cut three pieces of the chain; two measuring approx. 5cm and one measuring approx. 6cm.

10   Assemble the three small chains with an oval ring.

11   Attach the hearts, small chains and the ornamental pendant onto a large round jump ring.

12   Cut a chain of antique gold and one in champagne gold in the desired length. Put them together at one end with a round jump ring or an oval ring.

13   Attach the pendant onto the chain and close it at the other end with a round jump ring or an oval ring and a clasp.

14   Finished. Now the necklace is ready to be worn.