Lanterns from self-hardening clay with punched-out holes

SKU#:
v15733

Lanterns from self-hardening clay with punched-out holes

SKU#:
v15733

Make these lanterns from self-hardening clay by first cutting out the circular base with a shape cutter. Roll the side section (like a waistband) flat and make small holes with a round cookie cutter by pushing down the plunger on top. Assemble the circular base and the side section (waistband) and leave to dry.

Select products for the idea

* Required Fields

Total price for selected products
Your Customization
Creative idea
Lanterns from self-hardening clay with punched-out holes
Lanterns from self-hardening clay with punched-out holes

In stock

€3.46

Summary
    Creative idea
    How to do it
    Guide step %d
    1
    Roll self-hardening clay flat and make the base by cutting a circle with a round shape cutter in a suitable size.
    Guide step %d
    2
    Calculate the circumference of the lantern in order to make the outside (side section) of the lantern; i.e. multiply the diameter of the circular base (here 6 cm) by pi (3.14). The calculation in this case is 6 x 3.14 cm = 19 cm. Add another couple of cm for the overlap in order to join the lantern around the circular base. Roll the clay flat and cut out the circular base and the 21 cm long rectangular section (like a waistband). The height can be set according to your preference.
    Guide step %d
    3
    Use a round cookie cutter for making holes in the rectangular section of the lantern by pushing down the plunger on top of the cookie cutter.
    Guide step %d
    4
    Squeeze the lantern's outer side (the rectangular section) firmly around the circular base ensuring it sticks firmly. Fold over the ends.
    Guide step %d
    5
    A tip: If the clay overlaps the holes, use the round cookie cutter to re-make the holes by pushing down the plunger through both layers of clay.
    Copyright © 2013-present Magento, Inc. All rights reserved.