Key ring using punch needle technique

#v16809

Create a gorgeous key ring in muted colours using the trendy punch needle embroidery technique.

Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1   Cut around the outside edge of the template.
Guide step %d
2   Place the template in the middle of the embroidery fabric and trace along the edge.
Guide step %d
3   Remove the template and cut out everything marked 2. Now position the template so that it aligns with the outline you have drawn. Next, draw along the edge of what you have just cut out that was marked 2.
Guide step %d
4   Cut out the rest of the pattern and trace the outline in the centre of the pattern.
Guide step %d
5   Now thread the needle: Thread the needle through the tip and all the way to the top of the needle. Next, thread the yarn through the loop of the needle threader and pull so that the yarn reaches all the way down through the needle.
Guide step %d
6   Insert the needle threader through the small hole in the tip of the needle and thread the yarn through the loop of the needle threader. Now pull the yarn through the tip of the needle. The needle is now threaded.

Set the needle length to 5 (the longer the needle, the larger the loops)
Guide step %d
7   Attach the embroidery fabric to the embroidery frame. Once the fabric is tight, you can start to punch needle.
Punch needle with a stitch length of approx. 2–3 mm and insert the needle almost all the way down every time. Start along the edge of the pattern and work your way towards the middle.

Important: Leave 1.5 cm around the outer edge of the pattern for the embroidery seam allowance.
Guide step %d
8   Once the pattern is filled with yarn, cut along the outer edge (embroidery seam allowance). Now adhere the backside by applying a generous amount of glue with a brush and allow the glue to dry.
Guide step %d
9   Next, cut small notches in the embroidery seam allowance inwards towards the edge of the embroidery. Leave a gap of approx. 1 cm between each notch all the way around.
Guide step %d
10   Fold in all the edges and attach them with a layer of glue. Allow the glue to dry.
Guide step %d
11   Once the glue is dry, cut around 10 cm of satin ribbon. Fold the satin ribbon in half and sew it onto the back of the embroidery. Make sure that around 1 cm of folded satin ribbon extends beyond the edge of the embroidery for the key ring handle.
Guide step %d
12   Place the finished embroidery on top of the felt. Draw the outline of the embroidery pattern on the felt and cut it out.
Guide step %d
13   Glue the felt to the back of the embroidery with a thick layer of glue and allow to dry. Insert the key ring into the loop of the satin ribbon to finish.
Guide step %d
Template   Print the template here.
Attached file: Download
Also go exploring in

More Information

Create a gorgeous key ring in muted colours using the trendy punch needle embroidery technique.

More Information
SKUv16809
SeasonBasic

Description

Go back
I'm shopping as
Continue as guest
Your benefits of login

✔ Your personal wishlist

✔ See your order history

✔ Easy checkout
Your benefits of login

✔️ Your special prices

✔️ Special B2B products

✔️ B2B marketing universe
Your benefits of login

✔ Content especially for you

✔ Your special prices
Copyright © 2021-present Magento, Inc. All rights reserved.