How to make handmade tags from paper pulp using shape cutters

SKU
v15911

Learn how to make tags from paper pulp using shape cutters. A piece of twine is attached to the tags.

Select products for the idea

* Required Fields

Samlet pris for valgte produkter
Your Customization
How to make handmade tags from paper pulp using shape cutters
How to make handmade tags from paper pulp using shape cutters

In stock

€3.36

Summary
    How to do it
    Guide step %d
    1
    Moisten the paper pulp and tear it into small pieces. Leave it to soak completely.
    Guide step %d
    2
    Whisk the paper pulp to a uniform consistency either with a hand whisk or an electrical hand mixer.
    Guide step %d
    3
    Pour a thin mixture of the pulp into a cup. Place the shape cutters on the paper making frame mould and pour the mixture inside the shape cutter. Fill in the entire shape cutter.
    Guide step %d
    4
    Gently push the pulp mixture inside the shape cutter.
    Guide step %d
    5
    Fold a piece of felt and run it across the underneath of the frame to soak up the water. Squeeze out the water and continue like this until most of the water is absorbed.
    Guide step %d
    6
    Remove the shape cutters.
    Guide step %d
    7
    Turn over the frame and place it with the pulp face down onto a piece of felt.
    Guide step %d
    8
    Soak up more water but only press lightly.
    Guide step %d
    9
    Carefully remove the frame. Make sure that the pulp section comes away from the frame before lifting it. Leave the homemade piece of paper on the felt to dry. The drying time varies according to room temperature (24-48 hours).
    Guide step %d
    10
    Make holes in the tags using a screw punch. Attach a piece of natural twine for hanging.
    Copyright © 2013-present Magento, Inc. All rights reserved.