Temporarily, all prices are falsely shown with 25% VAT. VAT will be recalculated at order handling. We’ll manually check all orders to make sure that you get the correct VAT rate.

A pyramid-shaped Star, woven from Paper Star Strips

SKU
v14220

These pyramid-shaped stars are woven using glossy and glittery Vivi Gade design paper star strips (the Paris series).

Select products for the idea

* Required Fields

Samlet pris for valgte produkter
Your Customization
A pyramid-shaped Star, woven from Paper Star Strips
A pyramid-shaped Star, woven from Paper Star Strips

In stock

€2.63

Summary
    How to do it
    Guide step %d
    1.
    A star made from glittery and glossy paper star stips: Place and weave the strips on the table as shown. NB: Cut the ends off slightly diagonally.
    Guide step %d
    2.
    Weave the star following the instructions printed on the back of the packaging. However, only up to and including step 12.
    Guide step %d
    3.
    Fold down the paper strip at the top right, creating a diagonally divided area in the small square.
    Guide step %d
    4.
    Fold the strip up, along the edge of the small square, so that this strip now points upwards.
    Guide step %d
    5.
    Fold the same paper strip towards the left, once again creating a diagonally divided area in the small square.
    Guide step %d
    6.
    Fold the strip so that it's flush with the edge of the small square and place it to the right. NB: Press as you go along to make the creases sharp.
    Guide step %d
    7.
    Fold down the paper strip once again creating a diagonally divided area in the small square.
    Guide step %d
    8.
    Fold the strip up, along the edge of the small square, so that this strip now points upwards.
    Guide step %d
    9.
    Fold diagonally to the left as shown.
    Guide step %d
    10.
    Fold the strip from the edge to the right. Now turn the star 1/4 turn clockwise.
    Guide step %d
    11.
    Now follow steps 3-11. Always using the paper strip which is placed at the top right.
    Guide step %d
    12.
    An example of the finished folding on all four squares.
    Guide step %d
    13.
    Push all the folds flat. Turn the star over onto the opposite side and repeat the process.
    Guide step %d
    14.
    From two diagonally placed squares, push the two sets each consisting of three folds down in opposite directions. Feed the paper strip at the bottom right (same side up) through the opening in the square at the top left.
    Guide step %d
    15.
    Turn the star 180° clockwise. Hold on to the set of the three folds and pull the strip all the way through. The folds now stand upright. Continue like this with the other three squares.
    Guide step %d
    16
    This is how it looks when all four sets of folds are finished. Repeat on the opposite side.
    Guide step %d
    17.
    Trim all ends approx. 1 cm from each star tip and parallel to each star tip.
    Guide step %d
    18.
    Attach a split ring between two star points using split ring pliers.
    Guide step %d
    19.
    Hanging: Tie a 1 mm leather cord onto the split ring.
    Copyright © 2013-present Magento, Inc. All rights reserved.