Woven Bag/Purses (An Envelope Bag)

SKU
v11642

An envelope bag woven from printed paper with stylish patterns. Attach packaging tape onto the paper, then fold and weave it.

Select products for the idea

* Required Fields

Samlet pris for valgte produkter
Your Customization
Woven Bag/Purses (An Envelope Bag)
Woven Bag/Purses (An Envelope Bag)

In stock

€2.28

Summary
    How to do it
    Guide step %d
    1.
    Cut pieces of paper measuring 12 x 5.5cm. For this bag we have used 288 pieces of paper.
    Guide step %d
    2.
    Attach clear packaging tape to all the strips of paper.
    Guide step %d
    3.
    Fold lengthwise in the middle with the tape side out and “iron” the fold with a bone folder.
    Guide step %d
    4.
    Fold the two sides lengthwise to the middle.
    Guide step %d
    5.
    Fold together.
    Guide step %d
    6.
    Fold over in the middle.
    Guide step %d
    7.
    Fold the two sides in to the middle. Note that each link has an "easy" and a "difficult” side. On the "easy" side there are 4 layers of paper and on the "difficult" side there are 8 layers of paper.
    Guide step %d
    8.
    Insert one link into another link from the easy side.
    Guide step %d
    9.
    Insert the third link from the easy side and continue like this.
    Guide step %d
    10.
    After a row with 47 links, close with number 48.
    Guide step %d
    11.
    Do not fold link number 48 in from the sides towards the middle lengthwise. Insert link number 48 into link number 47 as a long link and stick it around and back into link number 47. Use scissors or a knitting needle to help insert the links. Then complete the ring.
    Guide step %d
    12.
    Each ring consists of 48 links and 6 rings are used in total.
    Guide step %d
    13.
    Tie around a link to secure a piece of cotton yarn.
    Guide step %d
    14.
    Sew the rings together. Do not sew into the paper at all but only into the folds. It is important that the rings are pushed together with a side where two layers are shown against a side where three layers are shown.
    Guide step %d
    15.
    -
    Guide step %d
    16.
    Sew the rings together from the outside.
    Guide step %d
    17.
    In the last ring, each part of a magnetic clasp is inserted into two links which are then plaited opposite each other. Alternatively, it is possible to sew in a zip after the bag is sewn together.
    Guide step %d
    18.
    The base is made by squeezing the sides together. Sew from one side to the other and back again. It's a good idea to sew the same place twice to increase its strength.
    Guide step %d
    19.
    Sew the corner by squeezing in one triangle whilst the last sewing is made like the others.
    Copyright © 2013-present Magento, Inc. All rights reserved.