Temporarily, all prices are falsely shown with 25% VAT. VAT will be recalculated at order handling. We’ll manually check all orders to make sure that you get the correct VAT rate.

A Keyring with a Leather Cord

SKU
v11133

A pendant made from plaited leather cords. Hot owls painted with Poster Hobby Markers on black shrink plastic sheets, shrunk in the oven to 1/3 of the original size and attached to a keyring.

Select products for the idea

* Required Fields

Samlet pris for valgte produkter
Your Customization
A Keyring with a Leather Cord
A Keyring with a Leather Cord

In stock

€3.10

Summary
    How to do it
    Guide step %d
    1
    Cut two pieces of leather cords each measuring 15cm. Fit these in the keyring.
    Guide step %d
    2
    Plait with four cords – plait the leather cord as shown in picture 2, 3 and 4.
    Guide step %d
    3
    Plait with four cords.
    Guide step %d
    4
    Cut off the ends.
    Guide step %d
    5
    Glue the ends together and attach an end cap.
    Guide step %d
    6
    Cut a 5cm piece of leather. Insert this piece through the eye of the end cap.
    Guide step %d
    7
    Glue on the bead.
    Guide step %d
    8
    -
    Guide step %d
    9
    -
    Guide step %d
    10
    -
    Guide step %d
    11
    Draw a design on a shrink plastic sheet. Please note that the motif shrinks to slightly less than half size.
    Guide step %d
    12
    Cut out the design.
    Guide step %d
    13
    Make a hole using a paper punch or use a hole punch. Paint with poster hobby marker.
    Guide step %d
    14
    Put it in the oven at 170°C for approx. 1 minute. The design will start to shrink and twist. Take it out when it is flat again – use tweezers if necessary.
    Guide step %d
    15
    Fit a round jump ring.
    Guide step %d
    16
    Attach to the keyring.
    Copyright © 2013-present Magento, Inc. All rights reserved.