Temporarily, all prices are falsely shown with 25% VAT. VAT will be recalculated at order handling. We’ll manually check all orders to make sure that you get the correct VAT rate.

Helmets – Role Playing

SKU
v11196

A beautiful knight’s helmet made from foam rubber sleeping mat material with cloth tape and double-sided adhesive tape, decorated with buttons and felt.

Select products for the idea

* Required Fields

Samlet pris for valgte produkter
Your Customization
Helmets – Role Playing
Helmets – Role Playing

In stock

€1.81

Summary
    How to do it
    Guide step %d
    Step 1.
    Print and cut out the pattern. Then draw the parts onto the foam rubber sleeping mat material.
    Guide step %d
    Step 2.
    Cut out the parts.
    Guide step %d
    Step 3.
    Put the triangles together with cloth tape as illustrated.
    Guide step %d
    Step 4.
    Use double-sided adhesive tape to attach the visor onto the helmet.
    Guide step %d
    Step 5.
    Also attach the strips using double-sided adhesive tape.
    Guide step %d
    Step 6.
    -
    Guide step %d
    Step 7.
    -
    Guide step %d
    Step 8.
    -
    Guide step %d
    Step 9.
    Cut off the excess at the ends.
    Guide step %d
    Step 10.
    -
    Guide step %d
    Step 11.
    Take extra strips and cut them into points at the ends.
    Guide step %d
    Step 12.
    Attach the strip, starting on the visor as shown.
    Guide step %d
    Step 13.
    Make “brads” from buttons and bonsai wire as shown.
    Guide step %d
    Step 14.
    -
    Guide step %d
    Step 15.
    Fasten the “brads” onto the helmet by pushing them through the foam rubber.
    Guide step %d
    Step 16.
    Bend out the legs of the “brad” on the reverse and cover with a piece of cloth tape.
    Guide step %d
    Step 17.
    -
    Guide step %d
    Step 18.
    Cut 6-10 strips (each approx. 1 x 50cm) from textured acrylic felt for helmet adornment.
    Guide step %d
    Step 19.
    Cut the ends into a point.
    Guide step %d
    Step 20.
    Take one of the strips and pull it through a “brad” as shown.
    Guide step %d
    Step 21.
    Then attach it onto the top of the helmet.
    Guide step %d
    Step 22.
    -
    Guide step %d
    Step 23.
    Now tie on the remaining felt ribbons with the fitted ribbon.
    Guide step %d
    Step 24.
    -
    Guide step %d
    Step 25.
    The finished Helmet
    Guide step %d
    A Variant of the Helmet
    This variant is made without visor and only with a nose protector and painted with Plus Color Craft Paint. The helmet has been painted in two stages; first with a base coat and then with a foam stamp to give texture.
    Guide step %d
    Template
    -
    Attached file: Download
    Copyright © 2013-present Magento, Inc. All rights reserved.