Cards with Christmas Boots

SKU#:
v11883

Cards with Christmas Boots

SKU#:
v11883

New simple cards with cut-out boot designs and bows with a 3D effect.

Your Customization
Creative idea
Cards with Christmas Boots
Cards with Christmas Boots

In stock

€2.63

Summary
    Creative idea
    How to do it
    Guide step %d
    1
    Draw the boot using the template and cut it out from Vivi Gade design paper. Cut out the heel and the toe in a different colour design paper.
    Guide step %d
    2
    Cut the back-ground from fibre paper – cut it slightly smaller than the actual card. Use pinking shears for cutting the fibre paper; it looks great. TIP: Place a piece of paper behind the fibre paper before cutting; then it's much easier to use the pinking shears.
    Guide step %d
    3
    Attach the fibre paper and the boot with double-sided adhesive tape and 3D foam pads.
    Guide step %d
    4
    Make a bow from a strip corresponding to the entire length of the paper (approx. 30cm) and approx. 1cm wide.
    Guide step %d
    5
    Attach a small piece of the strip around the bow to keep it together. Glue with a small blob of glue on the back.
    Guide step %d
    6
    Attach the bow to the boot with 3D foam pads. TIPS: if the design is attached upright, you may hang the card on a piece of string.
    Guide step %d
    Template
    -
    Attached file: Download
    Copyright © 2013-present Magento, Inc. All rights reserved.