An Invitation for a Girl’s Party

An Invitation for a Girl’s Party

Inspiration: 12198

From: €1.23

To: €307.96

Total price: €0.00

Incl. VAT

Availability: In stock

From: €1.23

To: €307.96

The invitation and the table decoration are made from card and beads. The little hanger is made from silver-plated wire and compliments the small dress perfectly.

Guide step 1
1.
Cut out the dress, the collar and the petticoat from the template in matching colours.
Guide step 2
2.
Assemble the parts with double-sided adhesive tape and 3D foam pads.
Guide step 3
3.
Attach a ribbon around the waist of the dress and fasten it on the back. For the bow, cut a piece of ribbon measuring approx. 20cm, tie the bow and attach it to the belt with a 3D foam pad. Trim the ends. Decorate the small collar with self-adhesive rhinestone half-pearls.
Guide step 4
4.
Cut a piece of silver-plated wire for the hanger. Double over the wire and twist a couple of times to form the shape. Bend the ends to form a small loop.
Guide step 5
5.
Attach the hanger onto the card. Attach 3D foam pads and attach the hanger with another two 3D foam pads.
Guide step 6
6.
Attach the dress to the hanger with 3D foam pads. Use two 3D foam pads on top of each other to achieve the same height as the hanger.
Guide step 7
7.
Make a small border and attach it to the card with double-sided adhesive tape.
Guide step 8
8.
Cut a piece of wire measuring 20cm for the bead coil. Thread beads onto the wire and twist the wire around a darning needle.
Guide step 9
9.
Push a hole through the card and attach the bead coil.
Guide step 10
10.
Cut a piece of paper. Attach the paper over the wire ends on the back with double-sided adhesive tape.
Guide step 11
11.
Guide step 12
12.
Guide step 13
13.
Place Cards: Cut a piece of silver-plated wire measuring 25cm. Twist to form a small loop at the end. Pull seven red and seventy orange beads onto the wire.
Guide step 14
14.
Bend the flower head around the silver-plated wire.
Guide step 15
15.
Form the petals and close the flower.
Guide step 16
16.
Thread a bead onto the end of the silver-plated wire.
Guide step 17
17.
Cut a new piece of silver-plated wire and twist it around the stalk.
Guide step 18
18.
Form the leaves.
Guide step 19
19.
Twist the wire around the leaves.
Guide step 20
20.
Thread a bead onto the end of the wire and bend to form a coil.
Guide step 21
21.
Bend to form a hook for hanging onto the glass.
Guide step 22
22.
Cut a piece of card for the place card which is attached onto the flower stalk with double-sided adhesive tape.
Guide step 23
23.
Guide step 24
24.
A Napkin Ring: Make a flower following the same procedure as for the place card. Feed a 30cm long piece of wire through the middle of the flower, double over and twist.
Guide step 25
25.
Bend the wire to a suitable size. Feed the wire through the middle of the flower.
Guide step 26
26.
Twist the wire around the ring.
Guide step 27
27.
The finished napkin ring.
Template
Attached file: Get it here

Buy items for the idea

Total price: €0.00

Incl. VAT