A Woven Star with a Tassel

SKU#:
v12844

A Woven Star with a Tassel

SKU#:
v12844

This star with a tassel and wooden beads is made from Vivi Gade Design weaving paper strips.

Select products for the idea

* Required Fields

Total price for selected products
Your Customization
Creative idea
A Woven Star with a Tassel
A Woven Star with a Tassel

In stock

€2.53

Summary
    Creative idea
    How to do it
    Guide step %d
    1.
    Cut the ends off four strips of paper diagonally.
    Guide step %d
    2.
    Pull the strips alternately outside and into the adjacent strip -
    Guide step %d
    3.
    - to form a square.
    Guide step %d
    4.
    Take one strip and bend down. Proceed like this with all four strips.
    Guide step %d
    5.
    Insert the last strip into and under the first strip -
    Guide step %d
    6.
    - and pull it through. Then turn the star over and repeat on this side.
    Guide step %d
    7.
    Take the strip on the left and bend it backwards to the left, and press it down.
    Guide step %d
    8.
    Bend the strip towards the middle and press it down.
    Guide step %d
    9.
    It will look like two triangular roofs.
    Guide step %d
    10.
    Make sure that all the strips are in line with the other strips.
    Guide step %d
    11.
    Bend the left strip over the other and press it down.
    Guide step %d
    12.
    Lift the strip and pull it through the hole in front –
    Guide step %d
    13.
    - and pull it through. Repeat with the next three strips on the left side and turn the star over.
    Guide step %d
    14.
    Repeat the bending of the strips on this side following steps 7-12.
    Guide step %d
    15.
    Take the strip – twist it backwards and push it through the adjacent strip.
    Guide step %d
    16.
    Pull the strip all the way through, so it comes out through one of the flat points -
    Guide step %d
    17.
    - and carefully pull tight.
    Guide step %d
    18.
    Continue the same way with the next three strips.
    Guide step %d
    19.
    Insert the last strip under the first pointed tip.
    Guide step %d
    20.
    Turn the star over.
    Guide step %d
    21.
    Repeat the bending of the strips on this side following steps 15-19.
    Guide step %d
    22.
    Cut off the strips right by the flat ends.
    Guide step %d
    23.
    Cut a piece of natural hemp cord measuring approx. 2m. Wrap approx. 1.5m of the string around four fingers.
    Guide step %d
    24.
    With the remaining 0.5m wrap this around one, leaving a small loop at the top.
    Guide step %d
    25.
    Pull the end of the cord through a needle and push it through the loop at the top.
    Guide step %d
    26.
    Push the needle through the loop a couple of times.
    Guide step %d
    27.
    Thread two beads onto the cord.
    Guide step %d
    28.
    Now push the cord through the star and thread another bead onto the cord.
    Guide step %d
    29.
    Cut open the tassel, loosening the cord ends.
    Guide step %d
    30.
    Attach self-adhesive rhinestone half-pearls onto the centre of the star.
    Guide step %d
    31.
    -
    Copyright © 2013-present Magento, Inc. All rights reserved.