A Windmill made from Reflective Plastic Sheets

SKU#:
v13589

A Windmill made from Reflective Plastic Sheets

SKU#:
v13589

The windmill consists of four sails made from reflective plastic using a template. Each sail is secured in the middle with an eyelet and a stub wire and then the windmill is then attached to a flower stick using cloth tape.

Your Customization
Creative idea
A Windmill made from Reflective Plastic Sheets
A Windmill made from Reflective Plastic Sheets

In stock

€4.73

Summary
    Creative idea
    How to do it
    Guide step %d
    1.
    Print the template which is available as a separate PDF file for this idea. Cut it out, and draw the parts onto a reflective plastic sheet. Cut out the parts. Make a hole in the middle of the circular piece.
    Guide step %d
    2.
    Use revolving hole punch pliers to make a hole in the middle of the square.
    Guide step %d
    3.
    Place the circle on top of the square and use an eyelet setter for attaching an eyelet in the middle – through the two holes.
    Guide step %d
    4.
    Cut towards the circle from each of the four corners.
    Guide step %d
    5.
    Make four holes with hole punch pliers – one in each left corner of each quarter.
    Guide step %d
    6.
    Turn each quarter and assemble them in the holes with eyelets.
    Guide step %d
    7.
    Use an eyelet setter for attaching the eyelet.
    Guide step %d
    8.
    Attach the stub wire onto the flower stick using cloth tape. Let 10cm of the stub wire protrude.
    Guide step %d
    9.
    Use round nose pliers for bending the protruding part of the stub wire downwards over the flower stick.
    Guide step %d
    10.
    Thread two beads onto the stub wire and then put the windmill onto the stub wire. Finish with a bead and bend the stub wire.
    Guide step %d
    11.
    Cut off the excess stub wire with side cutters.
    Guide step %d
    Template
    -
    Attached file: Download
    Copyright © 2013-present Magento, Inc. All rights reserved.