A Wall Clock made from a Tray and Faux Leather Paper
#v15458
Make your very own wall clock by decorating a tray with faux leather paper. The clock can then be hung with a faux leather paper star strip.
How to do it Download the templates/recipes
1 Start by finding the middle of the tray on the back. This is done by placing a ruler from one corner to the opposite corner. Draw a line at approx. the middle and repeat this process with all the corners.
2 Make a hole with an awl where all the lines cross. The hole must be large enough for the clock mechanism to fit through the tray.
3 Make a template for the three areas by drawing the outline of the tray onto a piece of paper. Draw the box patterns by placing a ruler from one corner to the opposite corner and draw lines as illustrated in this picture.
4 Cut out the template and use it for cutting out three pieces of faux leather paper.
5 Attach the pieces of faux leather paper onto the back of the tray using double-sided foil tape.
6 Fit the clock mechanism from the front of the tray as illustrated in the picture. You may make a hole in the faux leather paper with a craft knife in the same place where the hole in the tray is in order to achieve a neat result.
7 Assemble the clock mechanism as illustrated on the packaging.
8 Cut a 50 cm faux leather paper star strip for hanging the wall clock. Cut two pieces of double-sided foil tape the same width as the faux leather paper star strip and attach a piece at each end.
9 Attach the ends of the faux leather paper star strip onto each side of the wall clock and press firmly.
