A Keyring with a Leather Cord

A Keyring with a Leather Cord

Inspiration: 11133

From: €3.06

To: €427.94

Total price: €0.00

Incl. VAT

Availability: In stock

From: €3.06

To: €427.94

A pendant made from plaited leather cords. Hot owls painted with Poster Hobby Markers on black shrink plastic sheets, shrunk in the oven to 1/3 of the original size and attached to a keyring.

Guide step 1
1
Cut two pieces of leather cords each measuring 15cm. Fit these in the keyring.
Guide step 2
2
Plait with four cords – plait the leather cord as shown in picture 2, 3 and 4.
Guide step 3
3
Plait with four cords.
Guide step 4
4
Cut off the ends.
Guide step 5
5
Glue the ends together and attach an end cap.
Guide step 6
6
Cut a 5cm piece of leather. Insert this piece through the eye of the end cap.
Guide step 7
7
Glue on the bead.
Guide step 8
8
Guide step 9
9
Guide step 10
10
Guide step 11
11
Draw a design on a shrink plastic sheet. Please note that the motif shrinks to slightly less than half size.
Guide step 12
12
Cut out the design.
Guide step 13
13
Make a hole using a paper punch or use a hole punch. Paint with poster hobby marker.
Guide step 14
14
Put it in the oven at 170°C for approx. 1 minute. The design will start to shrink and twist. Take it out when it is flat again – use tweezers if necessary.
Guide step 15
15
Fit a round jump ring.
Guide step 16
16
Attach to the keyring.

Buy items for the idea

Total price: €0.00

Incl. VAT