Creative idea
A Keyring Fob made from a Shrink Plastic Sheet Figure
#v13293
This keyring fob is made from a shrink plastic sheet figure. Black and white Uni Posca markers are used for decorating. Cut out the figure and make a hole at the top using revolving punch pliers and then shrink the figure in a warm oven.
#v13293
How to do it
1. Use a black marker and draw a figure on white paper using your imagination. NB: use the A6 format.
2. Place the shrink plastic sheet on top of the design and trace it using a black Uni Posca marker. You may fill in with white Uni Posca.
3. Cut out the figure and make a hole at the top using revolving punch pliers for attaching it onto a keyring when finished.
4. Place the plastic figure on a piece of baking paper on a baking tray and place it in a pre-heated oven at 160°C for approx. 45 seconds or until the figure has shrunk and unfolded again.
5. Attach the finished shrink plastic sheet figure in a keyring as a pendant; a keyring fob.
Another variant -
Another variant -
Also go exploring in
Others have also looked at
{{ getVariationsCountLabel() }}
{{ getName() }}
{{ getDescription() }}
#{{ getSku() }}
Make idea from {{ getPriceFormatted() }}
{{ stockMessage }}
