A braided Bracelet with Beads and Rivets

#v13709

These bracelets are all braided using semi-gloss macramé cord. Beads are added as you go along making the bracelet. These can slide freely on the bracelet whilst the rivets are attached firmly.

#v13709
Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

How to do it
Guide step %d
1.   Cut an 85cm piece of macramé cord, double it over and tie a knot, making a loop. Attach the loop in the clip on the macramé board.
Guide step %d
2.   Thread the beads onto the doubled-over cord before securing it at the bottom of the macramé board with a clip. (We have used the following order: four clay beads, one imitation leather link and five clay beads).
Guide step %d
3.   Cut a piece of macramé cord measuring approx. 190cm. Double it over and arrange it so that the middle is underneath the two cords. Start braiding tightly. For further instructions, see our website for “Jewellery School” under “Braiding Techniques”.
Guide step %d
4.   Braid a section measuring approx. 6.5cm.
Guide step %d
5.   Push up four clay beads onto the braided section.
Guide step %d
6.   Attach a rivet between the two cords in the middle and braid tightly around the “collar” of the rivet.
Guide step %d
7.   Braid another section measuring approx. 2.5cm and push up the large bead with the imitation leather finish. In order to create a symmetrical design, repeat the mirror image of these steps.
Guide step %d
8.   Braid once around this and the 5th bead.
Guide step %d
9   Assemble the four cords in both ends in a knot and cut off the ends.
Also go exploring in
Copyright © 2021-present Magento, Inc. All rights reserved.