A Bird on a Bird Cage made from Stub Wires on a Wooden Icon Plate

SKU
v13562

A Bird on a Bird Cage made from Stub Wires on a Wooden Icon Plate

SKU
v13562

The bird cage is made from bent stub wires which are attached to a wooden icon plate. Natural eggs are placed inside the cage. A feathered bird is glued onto the top of the finished bird cage and a feather is placed as decoration next to the caged egg.

Your Customization
Creative idea
A Bird on a Bird Cage made from Stub Wires on a Wooden Icon Plate
A Bird on a Bird Cage made from Stub Wires on a Wooden Icon Plate

In stock

€1.68

Summary
    Creative idea
    How to do it
    Guide step %d
    1.
    Bend four 50cm long stub wires around the middle of a large bottle in order to achieve a curved shape. NB: use both hands and push firmly at the curve.
    Guide step %d
    2.
    Use a drill with a 2mm drill and drill eight holes on the wooden square icon plate. Drill the holes at a slight angle towards the centre of the icon plate, making the inserting the stub wires into the holes easier.
    Guide step %d
    3.
    Insert two stub wires in the corner holes in the icon plate, forming a diagonal cross. Cut the ends by approx. 1cm and DON'T FORGET to place the eggs onto the icon plate before inserting the last stub wire.
    Guide step %d
    4.
    Bend a stub wire; attach it at the top where all the stub wires are connected and twist. Trim the ends like a spire, approx. 2.5cm from the top of the cage.
    Guide step %d
    5.
    Use a glue gun for attaching a large wooden bead onto the spire and for attaching a feathered bird on top of the wooden bead. Also use a glue gun for attaching the egg and the feather inside the cage making sure that these do not move around inside the cage.
    Also go exploring in
    Copyright © 2013-present Magento, Inc. All rights reserved.