Pillar Candles made from Paraffin Wax

1. Prepare the mould: Push the wick through the hole at the bottom of the candle mould. Tie a thin piece of floral wire around the wick for guiding it into place. Tie a double knot in the wick protruding through the hole at the bottom of the mould. You may attach removeable sticky tack temporarily on the knot at the bottom to prevent the paraffin wax running out when it is poured into the mould.

2. Keep the wick in place by tying it around the middle of the special metal needle used for making candles in candle moulds. Place the needle across the top opening of the candle mould.

3. Melt the paraffin wax/candle wax in a melting pot. Place the melting pot in a water bath in a sauce pan or a pot. When the temperature of the candle wax has reached approx. 80°C, add candle dye beads. Use approx. 2g dye to 2kg paraffin wax. See the instructions on the packaging.

4. Pour the melted candle wax carefully into the mould. Note that the candle wax shrinks when it has solidified. Therefore, pour more candle wax into the candle mould after approx. one hour. Continue like this until the candle mould is completely filled.

5. Let the candle wax solidify completely before removing the finished candle from the candle mould. If the candle is stuck inside the mould, put it in the fridge or the freezer for a couple of hours.

TIP 1 High temperature gives a smooth, shiny candle. Low temperature gives a rustic look. Alternatively, you may make a pillar candle half the height or any height you choose.