An Invitation with punched-out Butterflies and Deco Foil

1 Place the silicone stamp with the butterfly design precisely in the middle of the card and mark with thin pieces of masking tape.

2 Use a glue pen to apply glue across the lines on the back of the silicone stamp. Turn over the stamp and press it onto the card. Remove the masking tape.

3 Leave the glue print until it is tacky; i.e. it's still sticky but doesn't stick to the fingers when touched. Place the deco foil on top and rub hard to attach it onto the glue. Carefully remove the deco foil sheet.

4 Make one stamped butterfly design at the time with deco foil; a total of three butterflies in different colours in a row.

5 Begin by embossing your chosen design onto card using base plate B + silicone plate + card + embossing folder + plate E.

6 Now die-cut your chosen butterfly design with a die using cutting plate C underneath + card + die + base plate B on top.

7 Now die-cut your chosen butterfly design with a die using cutting plate C underneath + card + die + base plate B on top.

8 Add glue onto small details of the card butterfly using a glue pen. Rub deco foil onto the glue as described in step 3.

9 Attach all the parts onto the card; glue the body of the vellum paper butterfly onto the card butterfly and attach the card butterfly onto the card using a glue pen. Remember to bend the wings upwards.

10 See our matching ideas: Place card 15381 Menu card 15382